lldpd is a 802.1AB implementation, a L2 network discovery protocol.
It also supports CDP, EDP and various other protocols.

Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>

This issue occurs When we copy file by rcp command between target and host,
if the file > 2GB, it will fail.
The cause is that it used incorrect data type on file size in sink() of rcp.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Just including the toolchain-layer in a bblayers.conf results in:
  ERROR: ExpansionError during parsing .../meta-oe/toolchain-layer/recipes-devtools/gcc/gcc-crosssdk_4.6.bb: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure: SRCREV was used yet no valid SCM was found in SRC_URI

Since there is no maintainer, remove it from meta-openembedded.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

IPTraf is a console-based network statistics utility for Linux.

Signed-off-by: Li Xin <lixin.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

| make: creating data/xsession/openbox-gnome-session
| make: creating data/xsession/openbox-session
| make: creating data/xsession/openbox-kde-session
| make: creating data/autostart/openbox-autostart
| make: creating doc/openbox.1
| make: creating data/autostart/autostart
| make: creating doc/openbox-session.1
| make: creating doc/openbox-gnome-session.1
| make: creating doc/openbox-kde-session.1
| make: creating doc/obxprop.1
| mkdir: cannot create directory './data/autostart': File exists
| Makefile:4329: recipe for target 'data/autostart/autostart' failed

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

libcap-ng 0.7.7 has been added to oe-core:
  ad509d7644803ff9386affefe2ec1a3664027074

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

swig 3.0.6 has been moved to oe-croe:
  66923c6776da13bd4513a73c3f7c5e60d74eb0f3

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

libmediaart 1.9.0 is a new version of the libmediaart
library, API-incompatible with the older 0.x one.

libmediaart-2.0 is needed to build Rygel, but as the 1.0
version is still needed, let us build them both if required.

Signed-off-by: Manuel Bachmann <manuel.bachmann@iot.bzh>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Drop 'inline' from some functions that had 'inline' keyword without
a definition at that point (they were defined in a different file).

Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* use PNBLACKLIST instead

This reverts commit 353b2cef

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* use PNBLACKLIST instead

This reverts commit a9733d04

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* use PNBLACKLIST instead

This reverts commit 1ead1a91

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* use PNBLACKLIST instead

This reverts commit 694119f6

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* use PNBLACKLIST instead

This reverts commit 84e8fee8

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Revert "gnome-terminal, system-tools-backends, slim, benchfft, syslog-ng: move to nonworking directories"

* use PNBLACKLIST instead

This reverts commit 92ea562b

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Use PNBLACKLIST instead

This reverts commit 8040a4c3

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Use PNBLACKLIST instead

This reverts commit b6643c81

.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Ulf Samuelsson <ulf@emagii.com>

libubox contains C utility functions used by OpenWrt projects

Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

debootstrap is a tool which will install a Debian base system into a
subdirectory of another, already installed system.

Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Those buildpaths were generated from configure substitutions, they are
required for cross-compiling, but obviously they should be cleaned up
from target stuffs.

Cleanup buildpaths from config_vars.mk and config.nice:

* remove ${STAGING_DIR_HOST} from CC, CFLAGS ...
* set APU_INCLUDEDIR, APU_CONFIG as empty
* remove buildpath from configure line

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Package QA complains about these files being installed but not shipped:
  /run
  /run/NetworkManager

Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Polkit is currently broken in images built with multilib and systemd.
This is because the patch, 0001-do-not-hardcoded-libdir.patch, applied on
top of the polkit source code modifies where the polkitd binary is
installed, but it does not modify the polkit.service file to start the
binary from its new location.

At first it seemed reasonable to modify the systemd service file to
search for the binary in the correct place. This change, as well as what
the patch (0001-do-not-hardcoded-libdir.patch) already does was proposed to
the polkit maintainers at https://bugs.freedesktop.org/show_bug.cgi?id=92094

During the discussion with the polkit maintainers it became apparent that the
change to support multilib polkit should not be done with a patch to
the polkit source code, but instead a change to the polkit recipe.

Polkit correctly installs libraries when multilib is in use without any
changes to its source code. What is being changed by
0001-do-not-hardcoded-libdir.patch is not where the polkit libraries are
installed but where the binaries are installed.

Installing binaries in /usr/lib when baselib is lib64 is acceptable (see
http://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch04s06.html

 ).

So, instead of patching polkit to install its binaries under the same
library directory as its libraries we maintain the design of the polkit
installer to install the binaries in /usr/lib. This is the same as what is
done in distros like Fedora that supports multilib.

With this patch the polkit package, when built with multilib, installs
files into /usr/lib* as follows:
polkit/usr/lib64/libpolkit-agent-1.so.0
polkit/usr/lib64/libpolkit-gobject-1.so.0
polkit/usr/lib64/libpolkit-gobject-1.so.0.0.0
polkit/usr/lib64/libpolkit-agent-1.so.0.0.0
polkit/usr/lib
polkit/usr/lib/polkit-1
polkit/usr/lib/polkit-1/polkitd
polkit/usr/lib/polkit-1/polkit-agent-helper-1

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The libmysqlclient_r library is now a symbolic link for the
libmysqlclient one, however some code still requires it for
linking.

To easy the transition, when installing the libmysqlclient-dev we
should include the libmysqlclient-r-dev as well.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Otherwise sed command for blk-availability.service may fail.
It will look for the service file in a wrong location

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* gdlib.pc:
  -L/path/to/tmp/sysroots/qemux86-64/usr/lib64 -> -L/usr/lib64

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Resolving the issue:

rgb.h:55:1: warning: inline function 'rgba2comp' declared but never defined
|  rgba2comp(kx_rgba rgba, kx_ccomp *red, kx_ccomp *green,
|  ^

Fix C99 inline semantic as documented here:
https://gcc.gnu.org/gcc-5/porting_to.html



Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Etienne Cordonnier <etienne.cordonnier@streamunlimited.com>
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

for those systems udev provides libgudev

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* all dynamically created packages start with libllvm${LLVM_RELEASE}-
  libllvm${LLVM_RELEASE}-%s-dbg
  libllvm${LLVM_RELEASE}-%s
  libllvm${LLVM_RELEASE}-%s-staticdev

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* to resolve QA warnings:
  sblim-sfcCommon-1.0.1: sblim-sfcCommon-dev doesn't match the [a-z0-9.+-]+ regex [pkgname]
  sblim-sfcCommon-1.0.1: sblim-sfcCommon-staticdev doesn't match the [a-z0-9.+-]+ regex [pkgname]
  sblim-sfcCommon-1.0.1: sblim-sfcCommon doesn't match the [a-z0-9.+-]+ regex [pkgname]
  sblim-sfcCommon-1.0.1: sblim-sfcCommon-doc doesn't match the [a-z0-9.+-]+ regex [pkgname]
  sblim-sfcCommon-1.0.1: sblim-sfcCommon-dbg doesn't match the [a-z0-9.+-]+ regex [pkgname]
  sblim-sfcCommon-1.0.1: sblim-sfcCommon-locale doesn't match the [a-z0-9.+-]+ regex [pkgname]

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>