Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

checked: patch or similar (for appdata) was applied

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

add CVE-2016-0773 patch for avoiding attackers to cause a denial
of service (infinite loop or buffer overflow and crash)
via a large Unicode character range in a regular expression.
Patch comes from:
http://git.postgresql.org/gitweb/?p=postgresql.git;a=summary


commit 3bb3f42f3749d40b8d4de65871e8d828b18d4a45

Signed-off-by: Zhixiong Chi <Zhixiong.Chi@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise minilua for host is built during build of target lua, see
  comment in Makefile:
  # If left blank, minilua is built and used. You can supply an installed
  # copy of (plain) Lua 5.1 or 5.2, plus Lua BitOp. E.g. with: HOST_LUA=lua
* be aware that there is still native buildvm which needs the same headers
  if it fails for you, then you probably need to install libc6-dev:i386
  which installs these headers to hosts /usr/include, some architectures
  are passing HOST_CC="${BUILD_CC} -m32" in EXTRA_OEMAKE, that's why
  you need 32bit headers on 64bit host.
* building native minilua fails on some hosts like this:
  ERROR: luajit-2.0.4-r0 do_compile: oe_runmake failed
  ERROR: luajit-2.0.4-r0 do_compile: Function failed: do_compile (log file is located at /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/luajit/2.0.4-r0/temp/log.do_compile.3067)
  ERROR: Logfile of failure stored in: /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/luajit/2.0.4-r0/temp/log.do_compile.3067
  Log data follows:
  | DEBUG: Executing shell function do_compile
  | NOTE: make -j 8 CROSS=arm-oe-linux-gnueabi- TARGET_CFLAGS= --sysroot=/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm  -march=armv5te -mthumb TARGET_LDFLAGS= --sysroot=/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm TARGET_SHLDFLAGS= --sysroot=/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemuarm HOST_CC=gcc  -m32
  | ==== Building LuaJIT 2.0.4 ====
  | make -C src
  | make[1]: Entering directory `/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/luajit/2.0.4-r0/LuaJIT-2.0.4/src'
  | HOSTCC    host/buildvm_asm.o
  | HOSTCC    host/minilua.o
  | HOSTCC    host/buildvm_peobj.o
  | HOSTCC    host/buildvm_lib.o
  | HOSTCC    host/buildvm_fold.o
  | CC        lj_gc.o
  | CC        lj_obj.o
  | CC        lj_char.o
  | In file included from host/buildvm_peobj.c:9:0:
  | host/buildvm.h:9:23: fatal error: sys/types.h: No such file or directory
  |  #include <sys/types.h>
  |                        ^
  | compilation terminated.
  | In file included from host/buildvm_fold.c:6:0:
  | host/buildvm.h:9:23: fatal error: sys/types.h: No such file or directory
  |  #include <sys/types.h>
  |                        ^
  | compilation terminated.
  | In file included from host/buildvm_asm.c:6:0:
  | host/buildvm.h:9:23: fatal error: sys/types.h: No such file or directory
  |  #include <sys/types.h>
  |                        ^
  | compilation terminated.
  | In file included from host/buildvm_lib.c:6:0:
  | host/buildvm.h:9:23: fatal error: sys/types.h: No such file or directory
  |  #include <sys/types.h>
  |                        ^
  | compilation terminated.
  | In file included from /usr/include/limits.h:25:0,
  |                  from /usr/lib/gcc/x86_64-linux-gnu/4.8/include-fixed/limits.h:168,
  |                  from /usr/lib/gcc/x86_64-linux-gnu/4.8/include-fixed/syslimits.h:7,
  |                  from /usr/lib/gcc/x86_64-linux-gnu/4.8/include-fixed/limits.h:34,
  |                  from host/minilua.c:33:
  | /usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory
  |  #  include <sys/cdefs.h>
  |                          ^
  | compilation terminated.
  | make[1]: *** [host/buildvm_lib.o] Error 1
  | make[1]: *** Waiting for unfinished jobs....
  | make[1]: *** [host/buildvm_fold.o] Error 1
  | make[1]: *** [host/buildvm_asm.o] Error 1
  | make[1]: *** [host/buildvm_peobj.o] Error 1
  | make[1]: *** [host/minilua.o] Error 1
  | make[1]: Leaving directory `/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/luajit/2.0.4-r0/LuaJIT-2.0.4/src'
  | make: *** [default] Error 2
  | ERROR: oe_runmake failed
  | ERROR: Function failed: do_compile (log file is located at /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/luajit/2.0.4-r0/temp/log.do_compile.3067)
  NOTE: recipe luajit-2.0.4-r0: task do_compile: Failed
  ERROR: Task 6 (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-devtools/luajit/luajit_2.0.4.bb, do_compile) failed with exit code '1'

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* some layers already have recipes for linux-backports
* don't know about anyone still using this and fails in default setups
  | make -C /home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/qemuarm/kernel-source M=/home/jenkins/oe/world/shr-core/tmp-glibc/work/qemuarm-oe-linux-gnueabi/compat-wireless-all/3.6.8-r1.0/compat-wireless-3.6.8-1 modules
  | make[1]: Entering directory `/home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/qemuarm/kernel-source'
  | make[2]: Entering directory `/home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/qemuarm/kernel-build-artifacts'
  | /home/jenkins/oe/world/shr-core/tmp-glibc/work/qemuarm-oe-linux-gnueabi/compat-wireless-all/3.6.8-r1.0/compat-wireless-3.6.8-1/config.mk:21: *** "ERROR: compat-wireless by default supports kernels >= 2.6.24, try enabling only one driver though".  Stop.
  | make[2]: *** [_module_/home/jenkins/oe/world/shr-core/tmp-glibc/work/qemuarm-oe-linux-gnueabi/compat-wireless-all/3.6.8-r1.0/compat-wireless-3.6.8-1] Error 2
  | make[2]: Leaving directory `/home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/qemuarm/kernel-build-artifacts'

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise fails with:
  /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/synergy/1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0/git/src/lib/plugin/ns/SecureSocket.cpp:26:25:
  fatal error: openssl/ssl.h: No such file or directory
  compilation terminated.
  make[2]: *** [src/lib/plugin/ns/CMakeFiles/ns.dir/SecureSocket.cpp.o]
  Error 1

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise fails with:
  | -- Looking for pthread_create in pthread
  | -- Looking for pthread_create in pthread - found
  | -- Could NOT find CURL (missing:  CURL_LIBRARY CURL_INCLUDE_DIR)
  | CMake Error at CMakeLists.txt:165 (message):
  |   Missing library: curl
  |
  |
  | -- Configuring incomplete, errors occurred!

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise may fail with:
  ERROR: synergy-1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0 do_unpack_extra: Function failed: do_unpack_extra (log file is located at /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/synergy/1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0/temp/log.do_unpack_extra.11874)
  ERROR: Logfile of failure stored in: /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/synergy/1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0/temp/log.do_unpack_extra.11874
  Log data follows:
  | DEBUG: Executing shell function do_unpack_extra
  | /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/synergy/1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0/temp/run.do_unpack_extra.11874: 105: /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/synergy/1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0/temp/run.do_unpack_extra.11874: unzip: not found
  | WARNING: exit code 127 from a shell command.
  | ERROR: Function failed: do_unpack_extra (log file is located at /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/synergy/1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0/temp/log.do_unpack_extra.11874)
  NOTE: recipe synergy-1.7.3+1.7.4-rc8+AUTOINC+588fb4b805-r0: task do_unpack_extra: Failed
  ERROR: Task 0 (/home/jenkins/oe/world/shr-core/meta-openembedded/meta-oe/recipes-support/synergy/synergy_git.bb, do_unpack_extra) failed with exit code '1'

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it actually depends on native intltool:
  NOTE: recipe system-config-keyboard-1.4.0-r0: task do_compile: Started
  ERROR: system-config-keyboard-1.4.0-r0 do_compile: oe_runmake failed
  ERROR: system-config-keyboard-1.4.0-r0 do_compile: Function failed: do_compile (log file is located at /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/system-config-keyboard/1.4.0-r0/temp/log.do_compile.16052)
  ERROR: Logfile of failure stored in: /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/system-config-keyboard/1.4.0-r0/temp/log.do_compile.16052
  Log data follows:
  | DEBUG: Executing shell function do_compile
  | NOTE: make -j 8 PYTHON=/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/python-native/python PYTHON_SITELIB=/usr/lib/python2.7/site-packages
  | make: intltool-merge: Command not found
  | make: *** [system-config-keyboard.desktop] Error 127
  | ERROR: oe_runmake failed
  | ERROR: Function failed: do_compile (log file is located at /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/system-config-keyboard/1.4.0-r0/temp/log.do_compile.16052)
  NOTE: recipe system-config-keyboard-1.4.0-r0: task do_compile: Failed
* and it also used gettext:
  | DEBUG: Executing shell function do_compile
  | NOTE: make -j 8
  PYTHON=/home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/python-native/python
  PYTHON_SITELIB=/usr/lib/python2.7/site-packages
  | cd po && for i in *.po; do msgfmt $i -o $(echo $i |sed s/.po/.mo/) ||
  exit 1; done
  | echo -e "#!/bin/sh\nexec /usr/bin/pkexec
  /usr/sbin/system-config-keyboard \"\$@\"" > "system-config-keyboard.sh"
  | chmod 755 "system-config-keyboard.sh"
  | /bin/sh: 1: msgfmt: not found
  | make: *** [gettext] Error 1
  | make: *** Waiting for unfinished jobs....
  | Merging translations into system-config-keyboard.desktop.
  | WARNING: exit code 1 from a shell command.
  | ERROR: oe_runmake failed
  | ERROR: Function failed: do_compile (log file is located at
  /home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5te-oe-linux-gnueabi/system-config-keyboard/1.4.0-r0/temp/log.do_compile.23230)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* drop
  commit 0792623dfa8156fb0af3f3949c901665e2df3d04
  Author: Stefan `Sec` Zehl <sec@42.org>
  Date:   Wed Jul 29 01:39:11 2015 +0200

    Fix/reimplement USBPATH support

    Using libusb functions to retrieve port and bus numbers.

    Thanks to Topi Kuutela for reviewing and testing the patch.

    Also thanks to Timo Poikola and Topi Kuutela for having submitted
    alternative patches.

    https://sourceforge.net/p/dfu-util/tickets/6/



Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* dfu-util-native was broken since last upgrade in:
  commit c2652c90


  Author: Li xin <lixin.fnst@cn.fujitsu.com>
  Date:   Sun Jan 3 18:07:17 2016 -0800

    dfu-util: 0.7 -> 0.8

    Upgrade dfu-util from 0.7 to 0.8.

    Modify SRC_URI,since the original one can�t be opened.
    Modify 0001-configure.ac-Don-t-check-for-usbpath.patch,since the datas has been changed.
  because
  0002-Revert-Makefile.am-Drop-static-dfu-util.patch
  didn't apply anymore.
* update
  0001-configure.ac-Don-t-check-for-usbpath.patch
  to keep check for sysexits.h

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

add CVE-2016-0766 patch for avoiding attackers to gain privileges
via unspecified vectors.
Patch comes from:
http://git.postgresql.org/gitweb/?p=postgresql.git;a=summary


commit f4aa3a18a20d51575562520754aa376b3b08b2d0

Signed-off-by: Zhixiong Chi <Zhixiong.Chi@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

restore swig file fiddling:

tmp/sysroots/qemux86/usr/include/openssl/opensslconf.h:45: Error: Unable to find 'openssl/opensslconf-64.h'
error: command 'swig' failed with exit status 1

Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

The patch that switches to pygobject can be now dropped, because
real introspection is provided in oe-core.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

The project is dead upstream, and relies on pygobject 2.x which has been replaced
by 3.x in oe.core.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Add a patch that makes gimp accept new versions of babl and gegl,
taken from Debian.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

This fixes gobject introspection support.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

This fixes gobject introspection support.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Now that the real introspection is available, and legacy pygobject is not,
the patch to use the latter should be removed.

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

Making it work would require significant patching - if you need it,
update your stack to gstreamer 1.x

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

It depends on pygobject 2.x which has been update to 3.x in oe-core

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>

It hasn't been updated in years, and depends on pygtk,
which is obsolete and incompatible with pygobject 3.x
(and so is no longer provided).

Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>