hddtemp is unmaintained upstream so we have to do a bit of patching. All
patches sourced from Debian/Fedora, except hddtemp-no-nls-support.patch
which came from OE-Classic.

Other improvements:
* Add initscript from Debian
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* inherit gettext to avoid error during configure

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Uprev traceroute from 2.0.12 in OE-Classic to 2.0.18.

Update SUMMERY, DESCRIPTION, LICENSE, LIC_FILES_CHKSUM, update do_install
to be similar Fedora rpm spec files, and update update alternatives to use
the update alteratives class.

Signed-off-by: Morgan Little <morgan.little@windriver.com>

Clean up recipes to make them easier to read and to allow ntp-ssl to build
 * Move common portions to ntp.inc
 * Update ntp-ssl to require ntp.inc oppose to ntp_${PV}.bb
 * Change ntp-ssl EXTRA_OECONF to append so it won't try to configure snmp as
it will use local paths can cause a error while configuring

Signed-off-by: Morgan Little <morgan.little@windriver.com>

Signed-off-by: Morgan Little <morgan.little@windriver.com>

Signed-off-by: Morgan Little <morgan.little@windriver.com>

There was a poky distro override to enable the "owl" window menu functionality.
As these packages are in meta-oe now and only Sato/poky supported owl, remove
the override and patches.

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

This introduces a recipe to build hplip 3.12.6 in a simple configuration
aimed at USB printers. It is based on a 3.11.3a recipe for oe classic
by Steve Sakoman.

The hp-setup program is patched to add a small delay after restarting cups,
as on slower embedded systems the cups daemon would sometimes not restart
quickly enough and adding a new printer would sporadically fail.

Tested on an armv6 system (with cups 1.4.6, ghostscript 9.05, foomatic).

Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

These are the tools needed for creating and managing f2fs partitions.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

includedir (by way of EXTRA_INCLUDES) gets into the CFLAGS of modphp
via apxs; thus it should not point to a location on the host.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

The class hasn't hit oe-core yet

This reverts commit eb66e508.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

This includes the patches in use in Debian package to fix color
inversion and other minor issues.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Path replacement was not happening on some machines if the MySQL build
scripts set a different path in the produced mysql_config script,
resulting in host paths being left in.

Original patch by Joe Slater <jslater@windriver.com>.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

autoconf.bbclass forces building po dirs by copying po/Makefile.in.in. We have
to care for libgphoto2_port/po/Makefile.in.in too and have to remove
AM_PO_SUBDIRS() from configure.ac since that causes

| autoreconf: running: aclocal --system-acdir=/home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/aclocal-copy/ --automake-acdir=/home/Superandy/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/share/aclocal-1.12 -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/auto-m4/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/m4m/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/auto-m4/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/m4m/ --force -I auto-m4 -I m4m
| configure.ac:230: error: `po-directories' is already registered with AC_CONFIG_COMMANDS.

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

The lmsensors project provides hardware health monitoring tools in the
form of kernel drivers, a user-space library and some helper
programs. This recipe provides all the different user-space tools
offered by lmsensors in separete packages. Startup scripts and default
configuration files are also made available through this commit.

The packages consist of (description text from lmsensors documentation):
* lmsensors-libsensors: The user-space sensors support library code.
* lmsensors-sensors: A console tool to report sensor readings and set
  new sensor limits.
* lmsensors-sensord: A daemon to watch sensor values and log
  problems. It includes RRD support.
* lmsensors-fancontrol: Controls fanspeeds responding to changes on
  temperature sensors. Configuration through pwmconfig.
* lmsensors-sensorsdetect: This program tries to detect the available
  SMBus adapters and the chips connected to them, as well as Super-I/O
  and misc chips.
* lmsensors-sensorsconfconvert: Convert configuration files from
  lmsensorsv2 to lmsensorsv3.
* lmsensors-pwmconfig: tests the pwm (pulse width modulation) outputs
  of sensors for their effect on the fans and helps to setup the
  configfile for fancontrol.
* lmsensors-isatools: This program sets/gets the registers of ISA or
  Super-I/O chips.

Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

To be merged after gtk-immodules-cache.bbclass hits oe-core

Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Sander van Grieken <sander@outrightsolutions.nl>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

* otherwise configure uses python-config from host and passes wrong CFLAGS
  see http://lists.linuxtogo.org/pipermail/openembedded-devel/2012-October/042058.html


  for details

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

disable microhttd and package new files

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

This fixes "ERROR: Multiple .bb files are due to be built which each provide jpeg"

Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Booted on eglibc i586, arm, ppc qemu  systems

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Bug fix release.

Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Without that change target system had to be restarted to get MySQL
running or it had to be run by hand. Reason was simple: mysql init
script was starting before S99configure when package was not yet
configured.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

* mcnavi depends on ecore, but meta-oe does not depend on meta-efl
* thanks to kergoth for reporting this!

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it was removed from oe-core
  http://git.openembedded.org/openembedded-core/commit/?id=5b3748d463a6666c0d8e2624092619da8d8e6328


* there should be --disable-xprint/--without-xprint too, but it looks
  like all support for xprint was removed from libxaw already

  commit 012e73faab8dc8617c6da4679715dae14f6cddd4
  Author: Daniel Stone <daniel@fooishbar.org>
  Date:   Fri Aug 15 18:25:53 2008 +0300

    Remove last remaining vestiges of Xprint support

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it was removed from oe-core
  http://git.openembedded.org/openembedded-core/commit/?id=5b3748d463a6666c0d8e2624092619da8d8e6328


* it needs to be explicitly disabled now, because recipe was removed in
  oe-core, but files still stay in sysroot and we cannot even
  cleansstate it now without recipes around.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it was fixed in mysql5 3f95bb90



Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* bitbake uses PACKAGES_DYNAMIC as regexp
  ^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
  * made all those last '-' optional, use .* (or nothing)
* use += instead of = in most cases to keep ${PN}-locale from
  bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Since we override do_configure, gnu-configize doesn't get called and
using the old gnu-config files distributed with the PHP source can cause
problems for some people e.g. building for AArch64; so add a call to it
explicitly here.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Maliit is a Qt based virtual keyboard under liberal license (LGPLv2.1 / BSD)
The inputmethod framework from Qt is used and it supports gtk-immodules.
It can also be used without dependencies to GTK+ (separate package for GTK+)

Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* Add SUMMARY
* Fix typo in DESCRIPTION
* Set LICENSE to a parsable form

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

The configure script fails without pangocairo which is provided by
pango.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

The license is Apache 2.0 according to the included LICENSE.txt file.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* To edit glade files for xfce-packages it needs libxfce4ui's catalog [1].
* Unfortunately some host distributions do not supply a libxfce4ui-glade package.
* By installing glade3 + libxfce4ui-glade it is now possible to edit xfce's
  glade-files on target machine.

[1] http://comments.gmane.org/gmane.comp.desktop.xfce.devel.version4/20021



Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>