Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* called from xkb map E17 module
Jan 02 02:58:42 gjama xinit[418]: SET XKB RUN: setxkbmap  -model 'default'
Jan 02 02:58:42 gjama xinit[418]: SET XKB RUN: setxkbmap  -model 'default'
Jan 02 02:58:43 gjama xinit[418]: /bin/sh: setxkbmap: command not found
Jan 02 02:58:43 gjama xinit[418]: /bin/sh: setxkbmap: command not found

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* 1.7.2 wont be released before E17 is finished, until then we need to backport
  mandatory patches or use conf/distro/include/efl-from-svn-recipes.inc

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* be aware that this rev is slightly newer then alpha4, because we
  need backported patch to edje-1.7
  r79484 | raster | 2012-11-21 00:58:03 +0100 (Wed, 21 Nov 2012) | 3 lines
  backport cedrics fix... not backported when done! :-P
  and also this works only with conf/distro/include/efl-from-svn-recipes.inc
  otherwise edje_cc segfaults when building default e-wm theme

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* E17 will depend only on EFL 1.7 (probably 1.7.2)
* next EFL release we'll have to update recipes a lot to use unified EFL
  source tree, maybe also git instead of svn
* some libs are for newer EFL_SRCREV moved to IN-EFL subdirectory in
  trunk (eet  eina  embryo  eo  evas  evil)
* trunk depends on edbus2 (edbus dir instead of e_dbus)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* at least native libxrandr libxdamage libxcursor libxcomposite
  libxfixes are autodetected sometimes, leading to irreproducible builds
  and failing edje_cc
  /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/edje_cc: error while loading shared libraries: libXcursor.so.1: cannot open shared object file: No such file or directory

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it's explicitly enabled in OECONF
  and fails without
  | evas_image_load_tiff.c:8:20: fatal error:  tiffio.h: No such file or directory

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* be aware that elocation, efreet and latest eve now depends on edbus2 (edbus directory in svn, e_dbus is edbus1)
  and we don't have recipe for edbus2 yet

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* moved to images subdirectory in r78304

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

* make keyboard layout combobox display languages properly
* systemd-support is included mainline
* autologin for timeouts < 5s works as expected

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Got an error building rrdtool because of hard-coded paths in the
configure.ac file. The extact error message was:

ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
Rerun configure task after fixing this. The path was '/home/marc/yoctomaster/build/crownbay/tmp/work/core2-poky-linux/rrdtool-1.4.7-r2/rrdtool-1.4.7'

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>

Version 2.6.0 is now in meta-networking.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Version 2.0.0 is now in meta-networking.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Version 1.7.2.0 is in OE-Core.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

This is now in OE-Core.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Added gypsy to meta-oe/recipes-navigation

Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* and Applying patch waf-as-source.patch
  ...
  File buildtools/bin/waf-svn is not empty after patch; not deleting
  ...
  Patch waf-as-source.patch does not apply (enforce with -f)
  I've dropped this chunk and now it builds

* there is also WARNING about unpackaged but empty base_sbindir
  WARNING: QA Issue: samba: Files/directories were installed but not
  shipped
    /sbin
  created by do_install in samba.inc but used only when cifs is built,
  maybe we should remove it from samba.inc now

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Update to 0.82
* Add ncurses to DEPENDS
* Add patch to fix configure with standard autotools_do_configure
* Add SUMMARY
* Add LIC_FILES_CHKSUM

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

This was originally from OE-Classic. Improvements over the OE-Classic
recipe for reference:

* Update to 1.3.4b
* Add workaround for proftpd host IP resolution
* Add initscript, borrowed from Debian with some modifications for
  compatibility and handling for hardcoded paths
* Use autotools.bbclass and remove unnecessary configure options
* PARALLEL_MAKE = "" is no longer needed, the bug was fixed in 1.3.3c
* Set SUMMARY (which sets DESCRIPTION) and base it on the short
  description from the website
* Use useradd.bbclass to add ftp user/group
* Add HOMEPAGE
* Add/fix description in some patches and improve recipe indentation
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM

Some of this work was done by Dexuan Cui <dexuan.cui@intel.com> and
Kevin Strasser <kevin.strasser@linux.intel.com>.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* Update to version 1.3.1
* Fetch source from a git tag as upstream apparently no longer publishes
  release tarballs
* Add virtual/kernel to DEPENDS since it needs the kernel source
* Inherit update-rc.d.bbclass
* Handle hardcoded paths in initscript
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)
* Remove some unnecessary cruft

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* Update to version 20
* Add LIC_FILES_CHKSUM
* Make LICENSE more accurate
* Set SUMMARY (which sets DESCRIPTION)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* Update to 1.9.1
* Add libdaemon to DEPENDS as needed by 1.9+
* Remove empty config file (not really of much use and there's an
  example config in the -doc package anyway)
* Use useradd.bbclass to create user
* Handle hardcoded paths in initscript
* Add LSB headers to initscript (borrowed from openSUSE)
* Set custom LICENSE as it's BSD-Style but not actually one of the
  standard BSD variants
* Add LIC_FILES_CHKSUM
* Set SUMMARY (which sets DESCRIPTION)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* Update to 0.99.21
* Fix SRC_URI to point to a working download location
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* Add old gentoo patch to fix libcap linking errors
* Put binaries in sbindir
* Use useradd.bbclass to create user/groups
* Handle hardcoded paths in initscript
* Add LSB headers to initscript (borrowed from debian)
* Tidy up packaging and directory references
* Add SUMMARY

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

* Set SUMMARY (which sets DESCRIPTION)
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>