The xmag utility magnifies the pixels rendered on-screen and is useful
for examining bitmaps and matching font metrics.

Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

xlsfonts is a lightweight command-line utility that is useful for
verifying which X.org fonts are installed and available on a system.

Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The xfontsel utility is useful for verifying and viewing the various
X.org fonts that are available on a system.

Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Use the latest version of usb-modeswitch (2.2.0) and
usb-modeswitch-data (20140529).

Note that usb-modeswitch-data requires usb-modeswitch
version >= 2.2.0 due to new parameter HuaweiNewMode.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

This should address issues found in test-dependencies 2014-07-25

wireshark/wireshark/latest lost dependency on  libcap libnl libnl-genl libnl-nf libnl-route portaudio-v19 sbc

Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

* Backported Arm build fix

Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Inital wireshark support on gtk+, gtk3
* README with additional info

Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* match old structure from meta-oe

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Dead peer detection (DPD) is a method that network devices use to verify
  the current existence and availability of other peer devices.
* NAT traversal (sometimes abbreviated as NAT-T) is a general term for
  techniques that establish and maintain Internet protocol connections
  traversing network address translation (NAT) gateways

Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

qemux86_64 has the same issue with powerpc64, set
BUILDTYPE=NATIVEONLY as default

Fix the below build issue for 64bit platforms:
| fatal error: gnu/stubs-32.h: No such file or directory
|  # include <gnu/stubs-32.h>
|                            ^
| compilation terminated.
| make: *** [obj32/elflink.o] Error 1

Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise fails with:
  | checking for MM... no
  | configure: error: Package requirements (dbus-glib-1 >= 0.86 glib-2.0
    >= 2.18 gmodule-2.0 gobject-2.0) were not met:
  |
  | No package 'dbus-glib-1' found

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

1. use PACKAGECONFIG
2. add three patches which will add the address check, to avoid SEGFAULT

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

libdir is defined as ${pref_exec}/lib/, but we want it to support multilib path

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

it will lead to QA failure, since .debug dir can not be installed into dbg package

    ERROR: QA Issue: non debug package contains .debug directory: openvpn path
    /work/core2-64-wrs-linux/openvpn/2.3.4-r0/packages-split/openvpn/usr/lib64i
    /openvpn/plugins/.debug/openvpn-plugin-down-root.so [debug-files]

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The messages echoed when starting and stopping syslog-ng are currently
printed regardless of the setting of VERBOSE.  Adjust the initscript so
they're only printed when VERBOSE is enabled.

Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Fix:
| .../packages-split/xterm/usr/bin/resize contains bad RPATH.

Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The two recipes for klibc-utils (static and shared) have been split-off
from a single original recipe for more granular packaging and share the
same SRC_URI set in the .inc file so there is an implicit dependency.
Make it explicit for the utils needing the shared klibc lib at runtime.

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>

The task was added with commit d31f75a72cb2322f753d945da86d5f3287eef06b
"insane: Split do_package_qa into a separate task (from do_package)"
and we avoid it because the recipe does not create packages.

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise the result isn't deterministic
  WARN: packages/armv5te-oe-linux-gnueabi/snort/snort/latest lost dependency on  libcrypto

* enable it by default, disabling currently doesn't work, because there are --with flags for
  openssl, but then configure.in still checks for sha.h header with
  AC_CHECK_HEADERS([openssl/sha.h],, SHA_H="no")
  and autodetects it, I'll leave patching configure to someone who
  is actually using snort (this issue was reported many times and
  nobody seems to care).

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise m4 eats all memory and is killed by OOMK
  [1051138.019784] Out of memory: Kill process 26264 (m4) score 860 or sacrifice child
  [1051138.019788] Killed process 26264 (m4) total-vm:23062712kB, anon-rss:15066516kB, file-rss:100kB

* very strange, but m4 and snort sometimes have strange side-effects,
  from first google result:
  http://www.hipforums.com/newforums/showthread.php?t=466568



Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* otherwise SUMMARY, HOMEPAGE, SECTION, LICENSE and DEPENDS are overwriten from
  .inc file

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* LIC_FILES_CHKSUM change only because of formating
  (unix line feeds and some alignment in header)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* the tarball is missing .pxd files and re-building with our python-cython fails with:
  | Compiling efl/elementary/scroller.pyx because it depends on /OE
  | Error compiling Cython file:
  | ------------------------------------------------------------
  | ...
  | from libc.stdint cimport uintptr_t
  | import traceback
  | from efl.eo cimport Eo, PY_REFCOUNT
  | from efl.utils.conversions cimport _ctouni
  | from cpython cimport Py_INCREF, Py_DECREF
  | cimport efl.ecore.enums as enums
  |        ^
  | ------------------------------------------------------------
  |
  | efl/ecore/__init__.pyx:221:8: 'efl.ecore.enums.pxd' not found

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Add PACKAGECONFIG for floating json dependency
* Add PACKAGECONFIG for floating tcp-wrappers dependency
* Disable mongodb host infection problem
* Disable rabbitmq host infection problem
* Add patch for dbi host include flags issue (making dbi conditionall really work)
* Fix configure automake flags handling

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

- initscript: add status, PIDFILE and xconsole
- syslog-ng.conf: dump the version
- Fix some memory leak problems we found
- Some backport patches
- scl: fix wrong ownership issue
- libnet: add libnet enable option and add it in PACKAGECONFIG
- add HOMEPAGE
- remove INC_PR
- change some config into PACKAGECONFIG
- add PACKAGE syslog-ng-libs to fix QA issue
- use volatiles
- inherit update-rc.d and update-alternative

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

when move a file, test if this file exist or not

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* Built with libav 9.13 and stand-alone libpostproc
* Although postproc is enable=auto, let's leave it disabled by default

Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Update the mercurial version to 3.0.1.
Update the checksums.
Remove the PR per current best-practice.

This resolves an issue with Mercurial 1.9 where fetching from behind a
proxy breaks with a python stack trace. The current python
httpconnection class no longer has the port setter method.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

i2c-tools was added to oe-core in commit:
32ac58819580d359e22161be1abf62215d202250

Remove it from meta-openembedded.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* now when insane_qa is moved to separate task, we cannot set INSANE_SKIP in do_package task

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>