The netcat-openbsd in meta-virtualization layer has bugs.
This update version will fix "nc: Protocol no available." error.
As bruce point, we want to keep netcat in the meta-networking,
which meta-virtualization will depend on,and this patch will let
netcat-openbsd with low priority to install

Signed-off-by: Lei Yang <lei.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* fix.build.automake-1.12.x.patch dropped as upstream has fixed
  the problem addressed.
* COPYING has had formatting changes
* In license segments of source files FSF street address is replaced
  with URL.

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Add obsolete-automake-macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Add obsolete-automake-macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Add obsolete-automake-macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Fixes parsing errors which is appearing after this commit to
meta-openembedded

http://cgit.openembedded.org/meta-openembedded/commit/?id=3c21a46020bd0816579648f684c41dbd6333583e



This triggers
exception NameError: name 'base_contains' is not defined
without this change

Signed-off-by: Andrei Gherzan <andrei.gherzan@windriver.com>

generation of scanner.c needs gram.h, not just scanner.o

Signed-off-by: Roy.Li <rongqing.li@windriver.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Damien RANNOU <damien.rannou@diateam.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

krb5 needs reconfigure, since the current config.sub included doesn't
include aarch64.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

error message was:
| checking for iceauth... no
| configure: error: iceauth missing, please check your X11 installation

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* renamed upstream Terminal -> xfce4-terminal [1]
* dependencies changed [1]

[1] http://mail.xfce.org/pipermail/xfce/2012-December/031872.html



Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* remove HAL from DESCRIPTION, it's from e_dbus

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* edbus2 was merged in efl tree and moved to IN-EFL in r81826
  there is important fix also in IN-EFL/edbus2

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* this upgrade is important mostly for edbus2
* edbus2 is using AC_TRY_RUN in edbus/m4/ac_valist.m4, it does not
  work for us cross-compiling
* without this change eve/enjoy segfaults:
  http://sourceforge.net/mailarchive/message.php?msg_id=30297875



Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* only copyright year updated in LIC_FILES_CHKSUM

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it can try to use host paths like:
  -lOpenCL -L/usr/lib/nvidia
  -lCL -L/usr/lib/nvidia
  -lclparser -L/usr/lib/nvidia
  ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* bison was upgraded to 2.7 in oe-core

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

samba was disabled in 12cf4fa8

 because it
caused OOM condition. This could not be reproduced any more. Likely reason for
OOM wasmissing gdu-volume-monitor which is build by an own recipe nowadays.

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

To find which dependency dragged in samba in folder image readelf was
performed:

> readelf -d usr/lib/libsmbclient.so

Dynamic section at offset 0x4bfec0 contains 36 entries:
  Tag        Type                         Name/Value
 0x00000001 (NEEDED)                     Shared library: [libc.so.6]
 0x00000001 (NEEDED)                     Shared library: [libtalloc.so.2]
 0x00000001 (NEEDED)                     Shared library: [libtdb.so.1]
 0x00000001 (NEEDED)                     Shared library: [libwbclient.so.0]
 0x00000001 (NEEDED)                     Shared library: [libresolv.so.2]
 0x00000001 (NEEDED)                     Shared library: [libnsl.so.1]
 0x00000001 (NEEDED)                     Shared library: [libdl.so.2]
 0x00000001 (NEEDED)                     Shared library: [librt.so.1]
 0x00000001 (NEEDED)                     Shared library: [libz.so.1]
 0x00000001 (NEEDED)                     Shared library: [libpthread.so.0]
 0x00000001 (NEEDED)                     Shared library: [libgcc_s.so.1]
 0x0000000e (SONAME)                     Library soname: [libsmbclient.so.0]

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Keyboard selection with lxdm is not very helpful:

* new keyboard connected get US layout independent of selection
* the selection is not persistent and has to be made on every login

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

can't wait for stable xfce 4.12 in 03/2013

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

this is a development release:
* tests did not show errors
* the new option to store default keyboard layout makes it worth to update

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

'Touchscreen pointer' can be set per pointer device. If the pointer device gets
active (Press/Move/Plugin) and this option is set:

* Mouse cursor is hidden during normal operation
* When waiting for startup-notification a wait cursor is displayed
* The gtk2 setting TouchscreenMode is set to e.g disable prelighting buttons
  on mouse over

The changes are in use for a while now on my devices help using XFCE on
touchsreen devices.

The git-version of this patch series was sent to
https://bugzilla.xfce.org/show_bug.cgi?id=9474

 but no response was received
yet. In the patch series attached here the binary cursor files 'invisible' and
'wait' were taken out of patch 0001.. because the files were not created by
do_patch.

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

error message was:
checking for garcon-1 >= 0.1.10... not found
*** The required package garcon-1 was not found on your system.
*** Please install garcon-1 (atleast version 0.1.10) or adjust
*** the PKG_CONFIG_PATH environment variable if you
*** installed the package in a nonstandard prefix so that
*** pkg-config is able to find it.
Configure failed. The contents of all config.log files follows to aid debugging

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>