This patch mainly involves two changes.
1. Create necessary files at do_install task. Add these configuration
   files to the CONFFILES variable.
2. Move the `chmod' and `chown' commands to do_install task.

After these two changes, qugga can run successfully at rootfs time.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

`/etc/init.d/populate-volatile.sh update' only needs to run in case
of an on-target installation. And it should have a prerequisite that
the script is executable.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

saslpasswd2 is used by an administrator to set a user's sasl password,
setting a default one in pkg_postinst in not only unnecessary but also
inappropriate.

Besides, running saslpasswd2 takes a significant amount of time to finish,
so this pkg_postinst will make the first boot take longer time.

According to the above two reasons, the patch remove the pkg_postint.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

While making use of the cyrus-sasl library an external application
will most likely include sasl.h which will cause compilation failures
if steps haven't been taken to define size_t. This should not be the
responsibility of the application building against the sasl library
but rather handled already in sasl.h. Here we ensure sasl.h has the
proper includes to have size_t defined before it is used.

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

There are two problems for ripd implementation after received
SIGHUP signal:
1). ripd didn't clean up ifp->connected list before reload
    configuration file which makes the same advertise packet
    being sent multiple times(depends on how many SIGHUP was recieved).
2). ripd reset ri->split_horizon flag to RIP_NO_SPLIT_HORIZON
    during restart which is different from the flag when ripd is
    firstly started up, leading to unnecessary route to be advertised.

[YOCTO #5266]

Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Mariadb will provide zlib.* if it can't find zlib binaries and headers
from sysroots path. We have set it to use external zlib.* firstly with
these definitions/configs in inc file:

    + DEPENDS = "ncurses zlib"
    + --with-zlib-dir=${STAGING_EXECPREFIXDIR}

But native bb file overrides the dependencies with:

    + DEPENDS = "ncurses-native"

If mariadb-naitve was built before zlib-native, its own zlib will be
built and provide zlib.la which will brake other packages link to real
zlib with errors like:

    * .../usr/lib/libz.a(gzclose.o): relocation R_X86_64_32 against \
      `a local symbol' can not be used when making a shared object; \
      recompile with -fPIC
    * .../usr/lib/libz.a: could not read symbols: Bad value

By removing the DEPENDS = "ncurses-native" from the native bb file,
mariadb-native will still have the DEPENDS (ncurses zlib) from the
inc file, and since the recipe is mariadb-native, this is equivalent
to DEPENDS = "ncurses-native zlib-native" due to the map_dependencies()
inner fuction for native_virtclass_handler() in "oe-core/meta/classes/
native.bbclass".

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The maliit sources are hosted on github now, update the SRC_URI
accordingly.

Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

configure python files installation path or else it will use the
default value /usr/lib/python*, which is wrong on 64bit and multilibs
enabled system

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

The tftp-hpa package installs /var/lib/tftpboot and tftpd-hpa is
configured to use that directory, but the default points at /svc/tftpboot.
Correct that so the default points to a location that exists when the
package is installed.

Signed-off-by: Joe MacDonald <joe@deserted.net>

Since both config_var.mk and config.nice will be packaged into sstate cache,
and be reused, add them into SSTATE_SCAN_FILES to replace the hardcoded paths

Signed-off-by: Roy Li <rongqing.li@windriver.com>

We will get the following ERROR/WARN if we enable the
installed-vs-shipped check in QA:

ERROR: QA Issue: cherokee: Files/directories were installed but not shipped
  /srv
  /srv/www
  /srv/www/htdocs
  /srv/www/htdocs/index.html
  /srv/www/htdocs/images
  /srv/www/htdocs/images/cherokee-logo.png
  /srv/www/htdocs/images/default-bg.png
  /srv/www/htdocs/images/favicon.ico
  /srv/www/htdocs/images/powered_by_cherokee.png

I think that we can pack these files into cherokee just like what
apache2 does.

Fedora 17 also packs them

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>

Signed-off-by: Nick Glynn <n.s.glynn@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>

Failed to fetch URL http://www.thrysoee.dk/editline/lib64-libedit-20121213-3.0.tar.gz



Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* it's causing huge deploy/licenses files:
  211M    deploy/licenses/bigbuckbunny-480p
  317M    deploy/licenses/bigbuckbunny-720p
  886M    deploy/licenses/bigbuckbunny-1080p
  and avi checksum is already verified by SRC_URI checksums

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* 3.3 is used by default mesa config, 2.8 is used in meta-java, keep 2.9 as last in 2*

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Add --ignore-fail-on-non-empty for rmdir in case there are files in the
directories.

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

If ${D}/run doesn't exist, the following statement will have non-zero
exit code, which leads to do_install failure.
     test -d ${D}/run && rmdir ${D}/run

Modify it to use the if statement to make the do_install task succeed
no matter ${D}/run exists or not.

Also, this patch removes the unused /var/run directory. Leaving that
directory there will result in /run directory created before splitting
package, which in turn lead to 'installed-vs-shipped' QA error or QA
warning.

Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Ktap is a new scripting dynamic tracing tool for Linux.

>From kernel v3.13 it'll live inside the kernel tree, but for earlier kernels,
this recipe will be usefull.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Breakpad is an open-source multi-platform crash reporting system.

Apart from the breakpad recipe, add a bbclass for applications that want
to use this library. This bbclass will set up the include path and also
generate the symbol file.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

/opt should never be used for packages built by OE, so install the tests in a more standard location.

Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Backports from upstream

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Initial recipe created by Khem Raj

Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Don't use srcdir with tests

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Don't use srcdir with tests

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

fixes crashing after first log off

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

"test -z ${PAMLIB}" in do_install() may report error if ${PAMLIB}
has space chars. This commit added double quotes to wrap it in
case of errors.

Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Otherwise, configure will try to auto-detect using host paths.

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Joe MacDonald <joe@deserted.net>

standalone daemon exits as recipe installs file as tftpd-hpa

* Changed script so it can consult /etc/default, as daemon name may be
 subject to change.
* Changed the default name to match the recipe

Signed-off-by: David Turgeon <david.turgeon@gmail.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>