Signed-off-by: Zongchun Yu <Zongchun.Yu@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

/var/run/ is more suitable to store pidfile for OE, and this fixes
"/etc/init.d/proftpd stop" failure too, since this script assumes
the pidfile is under /var/run

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

According to DISTRO_FEATURES to add pam support for quagga, and import
configure file from Fedora.

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Change the default config file for making watchquagga can startup successful

Signed-off-by: Bopeng Liu <Bopeng.Liu@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

commit 27ba970b

("quagga/ripd: Fix two bugs after received SIGHUP signal")
introduces an regression: ifp->connected list is cleaned up when ripd is
restarting, however, for interface addresses which are not specified in
ripd configuration file, they are never to be added into ifp->connected
again, this will lead to some abnormal behavior for route advertising.

Instead of cleaning up the ifp->connected list to avoid duplicated
connected address being added into this list, we can check this
condition during interface address adding process and return early
when an identical address has already been added.

Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Use /bin/false as the login shell, just like what Ubuntu does,
otherwise there might be secure issue.

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

If ntpd script is being called by a non-root user using sudo,
it will fail as follows:

/etc/init.d/ntpd restart
Stopping ntpd: /etc/init.d/ntpd: line 29: start-stop-daemon:
command not found
done
Starting ntpd: /etc/init.d/ntpd: line 24: start-stop-daemon:
command not found
done

This is because /etc/init.d/ntpd calls start-stop-daemon which
is in /sbin (not in the default path for non-root users)

Explicitly configure the PATH to include /sbin.

Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>

Reworked to set PATH instead of hardcode the location of start-stop-daemon

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

60-ntpd.list should be installed into the same path as ntp systemd service
file, like Fedora core; Orignal path refers
http://www.freedesktop.org/wiki/Software/systemd/timedated/

, but where
systemd_unitdir is assumed as /usr/lib/systemd, not /lib/systemd

Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

We don't have a proper help2man so building the manpages fails; just
disable building them to fix this as we do elsewhere.

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Proftpd is meant to be a system user, not a normal user of the
system so lets pass the correct parameters to the system.
Just add --system param when creating ftp group.

Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The libjson recipe was renamed to json-c in commit 533c1db2 of oe-core.

Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* bitbake-diffsigs output:
  basehash changed from 2f6aa4302713441e9c3c7207c4edea33 to 3486f2b65998ee4ec5bd5fbbe02cadb0
  List of dependencies for variable TARGET_LD_ARCH changed from 'set([])' to 'set(['TUNE_LDARGS'])'
  List of dependencies for variable TARGET_AS_ARCH changed from 'set([])' to 'set(['TUNE_ASARGS'])'
  List of dependencies for variable TARGET_OS changed from 'set([])' to 'set(['ABIEXTENSION', 'LIBCEXTENSION'])'
  List of dependencies for variable TARGET_CC_ARCH changed from 'set([])' to 'set(['TUNE_CCARGS'])'
  List of dependencies for variable TARGET_ARCH changed from 'set([])' to 'set(['TUNE_ARCH'])'
  Dependency on Variable ABIEXTENSION was removed
  Dependency on Variable TUNE_CCARGS was removed
  Dependency on Variable TUNE_FEATURES_tune-armv5t was removed
  Dependency on Variable TUNE_FEATURES_tune-armv5te was removed
  Dependency on Variable TUNE_ARCH was removed
  Dependency on Variable LIBCEXTENSION was removed
  Dependency on Variable TUNE_FEATURES_tune-armv5 was removed
  Dependency on Variable TUNE_LDARGS was removed
  Dependency on Variable DEFAULTTUNE was removed
  Dependency on Variable TUNE_ASARGS was removed
  Dependency on Variable TUNE_FEATURES was removed
  Variable TARGET_LD_ARCH value changed from 'none' to '${TUNE_LDARGS}'
  Variable TARGET_AS_ARCH value changed from 'none' to '${TUNE_ASARGS}'
  Variable TARGET_OS value changed from 'linux' to 'linux${LIBCEXTENSION}${ABIEXTENSION}'
  Variable TARGET_CC_ARCH value changed from 'none' to '${TUNE_CCARGS}'
  Variable TARGET_ARCH value changed from 'allarch' to '${TUNE_ARCH}'
  Hash for dependent task fbset-modes.bb.do_patch changed from eb8e475b55d64d5c9f6427a90e080ba6 to ee7e89fdd852378ee18ac23cdd92f3d3

The python-futures package is a backport of Python 3.2+'s
concurrent.futures module to Python 2.6+.

Signed-off-by: Dan McDougall <daniel.mcdougall@liftoffsoftware.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Add LAYERVERSION and LAYERDEPENDS to layer.conf

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>

* these were correctly removed from oe-core in
  commit 3b333896c71689c664475d53daed52404bf6b21b
  Author: Phil Blundell <pb@pbcl.net>
  Date:   Thu Nov 14 18:15:46 2013 +0000

    bitbake.conf: Remove obsolete/unused MIRROR cruft
  but we still need them here, so add them to layer.conf

* FREESMARTPHONE_GIT is used by 4 recipes in meta-oe and a lot more in meta-fso (which depends on meta-oe)
  meta-oe/recipes-devtools/vala-dbus-binding-tool/vala-dbus-binding-tool_git.bb:SRC_URI = "${FREESMARTPHONE_GIT}/vala-dbus-binding-tool.git;branch=master"
  meta-oe/recipes-support/serial-utils/pty-forward-native.bb:SRC_URI = "${FREESMARTPHONE_GIT}/cornucopia"
  meta-oe/recipes-support/serial-utils/serial-forward_git.bb:SRC_URI = "${FREESMARTPHONE_GIT}/cornucopia"
  meta-oe/recipes-support/vala-terminal/vala-terminal_git.bb:SRC_URI = "${FREESMARTPHONE_GIT}/vala-terminal.git;branch=master"

* E_MIRROR/E_SVN are used in many recipes in meta-efl, even with
  upstream moveing to git, not all components are already in git
  and for distros with populated PREMIRROR these variables are still
  important to parse the recipes.

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

  *snort - a free lightweight network intrusion detection
         system for UNIX and Windows

Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

  *Barnyard2 is a output system for Snort

Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

   *dumb networking library
   *snort depends libdnet

Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Joe MacDonald <joe@deserted.net>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* replace causes different signatures for different MACHINES, see
  http://lists.openembedded.org/pipermail/openembedded-core/2013-November/086510.html



Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* announcement:
  http://www.mail-archive.com/enlightenment-devel@lists.sourceforge.net/msg56588.html


* most likely last bump I'll do in meta-efl before upgrading recipes to 1.8

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Piglit is an OpenGL driver test suite that can automatically stress GL hardware
and generate machine- or human-readable reports.

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The compile hack to use a correct config.h isn't needed for native builds, so
mark it as target-specific.

Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* update SRC_URI according to download location for new releases

Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

The ser2net daemon allows telnet and tcp sessions to be established
with a unit's serial ports.

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

* was probably broken since it was added in:
  commit a506a9ef


  Author: Maxin B. John <maxin.john@enea.com>
  Date:   Tue Aug 27 07:55:14 2013 +0000
  Subject: log4cplus: add recipe

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

We end up with install errors when using high parallel factor like -j20

errors like

| mkdir: cannot create directory
`/``build/tmp-eglibc/work/ppce500v2-poky-linux-gnuspe/vim/7.4.27-r0/image/usr/share/vim/vim74':
File exists
| mkdir: cannot create directory
`/build/tmp-eglibc/work/ppce500v2-poky-linux-gnuspe/vim/7.4.27-r0/image/usr/share/vim/vim74':
File exists

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

During runtime testing of meta-cloud-services several python scripts were
continunously segfaulting the interpreter. corefiles and gdb pointed at
the greenlet implementation.

Moving to 0.4.1 fixed the segfaults, and showed no regressions.

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

bitbake lib32-mariadb
...
WARNING: QA Issue: ELF binary 'bitbake_build/tmp/work/x86-wrsmllib32-linux/lib32-mariadb/5.1.67-r0/packages-split/lib32-libmysqlclient/usr/lib/plugin/ha_xtradb.so.0.0.0' has relocations in .text
WARNING: QA Issue: ELF binary 'bitbake_build/tmp/work/x86-wrsmllib32-linux/lib32-mariadb/5.1.67-r0/packages-split/lib32-libmysqlclient/usr/lib/plugin/ha_innodb_plugin.so.0.0.0' has relocations in .text
...
The mariadb used absolute addresses on IA-32, we should forbid this.

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

By default emacs will build with x11 if the distribution has x11
support. However in a .bbappend file a user could strip away x11
support, even if x11 is supported on the platform. There was another
check in do_compile_prepend() that checked if the distro has x11
feature and not if PACAKAGECONFIG enables x11 support.

Since in this receipe dbus dependence is only marked if x11 is
enabled, desactiving x11 support should also desactivate dbus support.

Signed-off-by: Alexandre Tuleu <alexandre.tuleu.2005@polytechnique.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>

https://github.com/balister/meta-sdr



Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>